SAMI TECNO LT Stationary Concrete Batching Plant
SAMI TECNO LT Stationary Concrete Batching Plant
SAMI TECNO LT Stationary Concrete Batching Plant
- Concrete production: 60 or 100 m³/h
- Aggregate bins: 2, 3 or 4
- Electronic batching at ±3% accuracy
- Guards and walls on both sides for loading reversibility
- No loading ramps required
- Fully automated; GENIXeco PC management recommended
- Maintenance: simple and low-cost
Product Details:
Stop Running a Permanent Operation on a Plant Built for Short Jobs
Selling concrete to third parties or running a medium- to long-term site puts different demands on a batching plant than a two-week job. You need consistent output shift after shift, flexibility in how the site is laid out, and management tools that track production across customers, formulas and vehicles, not just today’s pours.
The SAMI TECNO LT handles that. This stationary concrete batching plant produces 60 or 100 m³/h with 2 to 4 aggregate bins and load cell batching at ±3% accuracy, for permanent installations, long-term construction sites and concrete production operations supplying third parties.
Solving Long-Term Production With TECNO LT
The TECNO LT is the stationary variant of the SAMI TECNO dry batch range. It runs the same proven batching system. Load cell weighing by deduction, automatic bin vibration, moisture detection and READYmix or GENIXeco management. But it is built and configured for fixed installation.
Guards and walls on both sides of the loading area allow full reversibility of the loading side, so the plant positions to match your site layout rather than the other way around. Despite being a stationary plant, it stays compact and light. It has been installed inside buildings and tunnels, on mountain tops and in traffic-congested city centres.
What You Get With Every TECNO LT Plant
At Batchcrete International, our TECNO LT plants come with the following features:
Electronic Batching
Aggregates, cement, water and additives are weighed by deduction at ±3% accuracy, meeting European standards.
Side Reversibility
Guards and walls fitted on both sides of the loading area allow the loading direction to be reversed, giving you full freedom in how the plant is positioned on site.
Aggregate Bins
Independent bins loaded during the dosing cycle, with automatic vibration to clear blockages without manual intervention.
Hydraulic Lifting
Loads and unloads without a crane. The bucket elevator folds inside the bins hydraulically.
Additive Management
Automatic moisture correction for aggregates up to 9 mm. Handles up to 4 additives and washing water.
Management Systems
READYmix touch-screen handles formulas, dosing archives and daily production. GENIXeco PC software with control cabin is the recommended configuration for full production database management: formulas, customers, work sites, vehicles, shipping documents and reports.
Compact and Low Maintenance
No loading ramps or installation authorisation required. Minimum maintenance costs.
Available Models
- Electronic batching at ±3% accuracy on every model.
- Guards and walls on both sides for loading reversibility.
- Compatible with horizontal or vertical cement silos.
TECNO 60 LT
| Model | N. Bins | Aggregate Storage | Flow Rate | Height | Width | Length |
| TECNO 2-60 LT | 2 | ~8 m³ | ~60 m³/h | 2.44 m | 7.00 m | 4.30 m |
| TECNO 3-60 LT | 3 | ~8 m³ | ~60 m³/h | 2.44 m | 9.60 m | 7.50 m |
| TECNO 4-60 LT | 4 | ~8 m³ | ~60 m³/h | 2.44 m | 11.80 m | 9.70 m |
TECNO 100 LT
| Model | N. Bins | Aggregate Storage | Flow Rate | Height | Width | Length |
| TECNO 2-100 LT | 2 | ~13 m³ | ~100 m³/h | 2.80 m | 2.44 m | 9.60 m |
| TECNO 3-100 LT | 3 | ~12 m³ | ~100 m³/h | 2.80 m | 2.44 m | 11.80 m |
| TECNO 4-100 LT | 4 | ~12 m³ | ~100 m³/h | 2.80 m | 2.44 m | 13.50 m |
TECNO 100 LT PLUS
| Model | N. Bins | Aggregate Storage | Flow Rate | Height | Width | Length |
| TECNO 1-100 LT PLUS | 1 | ~11 m³ | ~100 m³/h | 2.80 m | 2.44 m | 4.50 m |
| TECNO 2-100 LT PLUS | 2 | ~11 m³ | ~100 m³/h | 2.80 m | 2.44 m | 9.60 m |
| TECNO 3-100 LT PLUS | 3 | ~11 m³ | ~100 m³/h | 2.80 m | 2.44 m | 12.40 m |
| TECNO 4-100 LT PLUS | 4 | ~11 m³ | ~100 m³/h | 2.80 m | 2.44 m | 13.60 m |
Best Applications
The TECNO LT suits permanent and long-term concrete production operations selling to third parties, medium- to long-duration construction sites, sites with lifting equipment, urban works, road works, housing projects, and wind plant foundations and river works.
WHY CHOOSE US
Assured Quality
We ensure the integrity and quality of your materials, helping to reduce wastage and enhance cost-effectiveness. Our rigorous quality control measures and high-performance materials guarantee superior results for every application.
Versatility
Our equipment is designed to meet the diverse needs of small, medium, and large-scale projects. Whether you are handling a residential build or a large commercial project, our solutions can be tailored to meet your specific requirements.
Dedicated Support
Batchcrete provides comprehensive customer support, including equipment setup, operational training, and ongoing maintenance. Our expert team is committed to assisting you throughout the lifecycle of your equipment, ensuring maximum uptime and productivity.
Innovative Engineering
We continuously integrate the latest technologies to meet the ever-changing needs of the construction industry. Our commitment to innovation leads to smarter, safer, and more efficient practices in material handling and storage.
Frequently Asked Questions (FAQs)
1. Can this plant stay on site for years without needing to move?
Yes. The TECNO LT is built for permanent or long-term fixed installation. It does not need to relocate, and it is sized and configured to run continuously at the same location.
2. Does the TECNO LT need a concrete foundation?
No. It installs on solid, compact ground with no foundation, no loading ramps and no authorisation required.
3. Can the TECNO LT produce concrete for sale to third parties?
Yes, that is one of its primary use cases. The GENIXeco PC management system handles customer records, formulas, shipping documents, vehicle tracking and production reports everything a concrete sales operation needs.
4. How many aggregate types can the TECNO LT handle?
Between 2 and 4, depending on the model. More bins mean more aggregate separation, useful when mix designs require multiple sizes or types.
5. What is the difference between the 60 LT, 100 LT and 100 LT PLUS?
Output rate. The 60 LT produces ~60 m³/h. The 100 LT and 100 LT PLUS both produce ~100 m³/h. The PLUS starts from a single bin and has the smallest footprint in the 100 m³/h range.